Usar apenas cab do jsx combo com power amp ?

Forumúsica: Usar apenas cab do jsx combo com power amp ? - Forumúsica

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Usar apenas cab do jsx combo com power amp ?

#1 wildstringdom

80 bpm

Group: Membros
Feedback: View
Posts: 72
Joined: 19-December 10

Posted 23 January 2012 - 01:21

Boas pessoal,

Tenho um peavey jsx combo, gostava de usar um kemper (modeler) atraves de um art sla-1 power amp MAS apenas usando a cab do combo. Seria possivel desligado o cabo da coluna que vai para head do combo? a questão dos ohms confunde me por completo...

art sla-1:

ART SLA-1 Linear Studio Amplifier, 100W RMS @ 8ohms per channel, 130W RMS @ 4ohms per channel, 260W RMS at 8ohms bridged, 10Hz-40kHz +/- 0.5dB, CMMR > 60dB (typical @ 1khz), THD <0.05%, balanced XLR & unbalanced 1/4" jack inputs.

OPERATION PRECAUTIONS
Warning: For optimum performance and reliability, do not operate the
amplifier with a speaker load of less than 4 ohms per channel, or any
combination of speakers that together are less than 4 ohms.
Using one speaker per channel, it must be rated at 4 or more ohms.
Using two speakers per channel, they must each be rated at 8 or more
ohms. When in Bridge Mode, the speaker should be rated at 8 or more
ohms.

jsx combo:

2 JSX Speakers rated 8ohm each, Standard combo runs at 16 ohms with both speakers

Obrigado desde já

This post has been edited by wildstringdom: 23 January 2012 - 02:34